篮球胜分差中大奖

You Are Here: HOME>Inductive Switch>Microwave Sensor>RF Microwave Sensor > TA-WW600

TA-WW600

Wireless Dimmable Microwave Sensor Combine With LED Driver

  • Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
  • 64 groups can be set
  • RF transmission distance: up to 30m in open area.

Master/slave signal transfer: When one light is triggered and switch on, it emits the signal to other lights in the same group, and triggers them on, too.
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status, and waiting for the next room.
Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
64 groups can be set
RF transmission distance: up to 30m in open area.


Technical Data:

Item No.

TA-WW600

Input voltage

220-240V/AC, 110-130V/AC

Rated Loading

LED 16W

IP Rating

IP20

Adjustment Type

Dip and Knob

Light Control

10-2000lux

Detection angle

360°

Detect Distance (radii.)

2-10m

Time delay

8sec to 10min

Stand-by Dim Setting Time

30sec, 1min, 5min, 10min, 30min, 1h, 2h, 24h

Stand-by Dim Setting Brightness

0%, 5%, 10%, 20%, 30%, 40%, 50%, 60%

Radio Linking Range

30m Radio

Detection angle

360°


Dimmable:

The dimmable lights are added a light down function between the light is 100% switched on and switch off.
It reduces the brightness of light when nobody there at a pre-set time. (The user can set up the brightness by themselves according to the actual usage).
If there is no motion in the stand-by time, the sensor turns off the light to save the energy. When somebody comes, the sensor will quickly turn on the light into full-brightness status. With this function the light can be extended the lifetime.


篮球胜分差中大奖